Welcome to the Genuine guide about how to use Lost Angel Vapes! With the following steps, even beginners will be able to master everything about Lost Angel Mate 50K and the Sphere 35K and get the best tastes of Lost Angel flavors.
01. How to Use Lost Angel Mate 50K
With a replacement pod system, the Mate 50K features a 2-module design. Before using your device, make sure you’ve got both parts of it. Check the step-by-step guide below to know how to master the pod system.
Step-by-Step Activation:
- Unbox: Open the box and check if you’ve got a full kit including 2 parts:
- A battery pack: main power source with 1000mAh built-in battery & curved screen display.
- A flavor pod (or more): including a 200mAh battery & flavored e-liquid in the visible tank.
- Remove & Connect (Critical): Remove the plug in the mouthpiece and any other seals. Attach the pod to the battery pack.*Be sure to remove the insulating seals covering the metal pins on both parts. They won’t be successfully connected until all seals are removed.*
- Activate & Adjust: Press the front button on the battery pack to activate. Find the switch at the bottom of the pod, and slide it to one side or another to adjust the mode.
- Normal Mode: Up to 50K airy puffs with looser hits and less flavor intensity.
- Boost Mode: Up to 30K stronger puffs with tighter hits and intense flavor.
- Monitor: Keep an eye on the indicator on the screen of the battery pack:
- Battery Level & Current Mode: Real-time indicated on the screen.
- E-liquid Level: Observed directly from the visible tank of the pod.
- Charge: When battery runs low, plug in a Type-C USB cable to the charging port at the bottom of the battery pack. A full charge typically takes about 30-60 minutes, depending on your charging source. *Be sure to remove the insulating seals between the 2 parts. The pods can’t be charged without being connected to a battery pack.*
- Deep Dive: For charging times, battery care, and troubleshooting charging issues, read the full charging guide.
02. How to Use Lost Angel Sphere 35K
As one of the most popular models of Lost Angel, Lost Angel Sphere 35K is not only known for its impressive performance, but also good for the convenient use. This all-in-one device will put everything in your hand with the simplest steps:
-
1Unbox: Remove all stickers, especially the one covering the USB-C port and airflow holes at the bottom.
-
2Mode Switching: Find the switch at the bottom of your vape, and slide it to one side or another to adjust between Regular Mode (Longer life) and Pulse Mode (Stronger flavor).
-
3Monitor & Charge: Find real-time info of your device on the curved screen, including battery level, e-liquid level and current mode. When battery is low, plug any Type-C USB cable (not-included in your pack) into the charging port at the bottom of the device.
Troubleshooting Common Issues
Device Not Hitting
Did you remove all the stickers on your device? Did you connect the pod and the battery (for Mate 50K)? Check the battery level of your device and make sure it is charged. Or make sure the airflow holes are unclogged.
Burnt Taste
Check the e-liquid level to see if it’s runnning low. You can find the e-liquid status on the screen of Sphere 35K or through the visible tank of Mate 50K. If the pod is empty, just buy a new one for replacement.
Frequently Asked Questions
Can I use or charge Lost Angel Mate 50K pods without the battery pack?
The pods are coming with standalone battery and can be used independently. However, whenever the built-in battery within them runs low, you’ll have to charge them along with the battery pack, since the charging port is only available on the pack.
How to unclog a disposable vape if my Lost Angel Vape is not working?
If your vape is clogged, try tapping it gently to dislodge any blockage. You can also blow air through the mouthpiece to clear any excess liquid or residue.
Why is the e-liquid in the tank of Lost Angel Mate 50K not full?
Due to the automatic coil mechanism, there will be a small amount of e-liquid absorbed by the saturated cotton in the coil in advance. A 1-2 mm level down of e-liquid in the visible tank is a normal status.